Console turns on but no picture on the TV: HDMI checks and safe mode
The short answer
A console that powers on with a black screen has usually not lost your games or saves. The console is running. Its picture is simply not reaching the TV, and there are three places that can go wrong: the TV end, the cable in between, and the console's video output.
The first two are quick to rule out. The third splits into a settings problem and a hardware problem. A console set to a resolution or format that the TV cannot display will show nothing at all, and both PlayStation and Xbox have a special start-up mode to get you out of exactly that situation.
The hardware fault is a damaged HDMI port. It is one of the most common console repairs, because the port is a small surface-mounted part and the cable acts as a lever every time the console is moved or the lead is tripped over.
Likely causes, most common first
Wrong TV input, or a cable that is loose or faulty
DIYConsole lights and sounds are normal. The fault appeared after the console or TV was moved, or after someone else used the TV.
Video output set to something the TV cannot display
DIYBegan after changing display settings, connecting to a different TV or through a soundbar or receiver. Safe mode shows a picture when normal start-up does not.
Failed HDMI handshake
DIYBlack screen or a brief flash of picture after a blackout, an update or waking from rest mode. Clears after a full power-down of both devices.
Damaged HDMI port on the console
ProfessionalPlug feels loose or sits crooked, pins look bent or pushed back, picture flickers or sparkles when the cable is touched, or there is no picture on any TV.
Failed HDMI output chip on the main board
ProfessionalPort looks undamaged and the console appears to start normally, but there is no picture on any TV or cable, even in safe mode. Often follows a storm or power surge.
Console is not actually starting up
ProfessionalPower light blinks or pulses and never settles, the console turns itself off, or there are no start-up sounds.
Before you start
Safety first
- Turn the console off completely and wait for its lights to go out before unplugging the power lead. Cutting power while the console is running can corrupt data.
- Never force an HDMI plug or wiggle it hard in the socket to get a picture. That is how a marginal port becomes a broken one.
- Do not push pins, tweezers or anything metal into the HDMI port to straighten contacts.
- Do not open the console or its power supply. A damaged port is a soldering job at the circuit board, not something to fix from outside.
- In PlayStation safe mode, read each option before selecting it. Some options erase everything on the console.
What you will need
- A second HDMI cable known to work
- Torch
- USB cable for the controller
- A second TV or monitor with an HDMI input, if you have access to one
Step-by-step checks
Step 1: Check what the console is doing
Watch the power light when you turn the console on. A light that settles to its normal steady state, along with the usual start-up beep or fan noise, tells you the console has started and the problem is the picture. Pressing the controller's home button and hearing menu sounds through a headset is further confirmation.
A light that keeps pulsing or blinking and never settles, or a console that switches itself off, is a different fault. The console is not finishing its start-up, and HDMI checks will not help. A blinking power light on a PlayStation, for example, generally means it has not started properly.
Step 2: Confirm the TV input and reseat the cable
Check which numbered HDMI port the console is plugged into on the TV and select that input with the TV remote. Test the TV with another device or its own apps so you know the screen is working.
Turn the console off, then unplug the HDMI cable at both ends and plug it back in firmly. Make sure it is in the console's HDMI output. If the console runs through a soundbar, receiver, switch box or capture device, take those out and connect it straight to the TV for testing.
Step 3: Try another TV port and another cable
Move the cable to a different HDMI port on the TV and select that input. Then swap in a different HDMI cable. Change one thing at a time so you know which change made the difference.
Current consoles are supplied with an Ultra High Speed HDMI cable, which their highest video modes need. An older or cheaper cable from a drawer is fine for testing and for 1080p, but it may fail at 4K with high frame rates. If the picture only works with the old cable at lower settings, replace the original with a certified Ultra High Speed cable.
Step 4: Do a full power-down of console and TV
Turn the console off completely. On PlayStation, hold the power button until you hear a second beep, then wait for the light to go out. A light that stays on or pulses orange means the console is in rest mode rather than off. On Xbox, hold the Xbox button on the front of the console for about ten seconds. Then unplug the console and the TV at the power point and leave both for at least a minute.
Plug the TV in first, turn it on and select the console's input. Then plug in and start the console. This forces a fresh HDMI handshake and clears a surprising number of black screens, especially after a blackout or a system update.
Step 5: Start a PlayStation in safe mode
With the console fully off, press and hold the power button. You will hear one beep when you press it. Keep holding until you hear a second beep about seven seconds later, then let go. Connect the controller with its USB cable and press the PS button.
Safe mode displays at a basic resolution, so seeing the safe mode menu on your TV is good news. It means the HDMI port and cable are working and the problem is a setting. Choose Change Video Output on a PS5, or Change Resolution on a PS4, and restart. The console starts at a low resolution and you can then set the output to suit your TV. If the picture still drops out afterwards, the HDCP mode option in the same PS5 menu is the next thing to try.
Careful: Do not select the reset or reinstall options in safe mode to fix a picture problem. They erase your data and will not repair a display fault.
Step 6: Start an Xbox in low-resolution mode
Turn the console off and remove any disc. On a console with a disc drive, press and hold the Xbox button and the eject button together. You will hear one beep straight away. Keep holding until a second beep about ten seconds later, then release. On a console without a disc drive, hold the pair button in place of the eject button.
The console starts at a very low resolution of 640 by 480, which nearly every TV can show. If a picture appears, go to Settings, then General, then TV and display options, and choose a resolution your TV supports. If you are unsure, start at 1080p and work up.
Tip: Button layouts differ between Xbox models. If the combination does not work on yours, look up low-resolution mode for your exact model on the Xbox support site.
Step 7: Inspect the console's HDMI port and test on another screen
If safe mode or low-resolution mode gave no picture either, shine a torch into the console's HDMI port. The centre tongue should be straight and level, with an even row of gold contacts. Look for contacts that are bent, pushed back or missing, a tongue that is cracked or tilted, or a metal shell that has spread or moves when the plug goes in.
Then take the console and a known good cable to a different TV or monitor. No picture on a second screen, with a console that otherwise starts normally, confirms the fault is in the console's HDMI output. That is the point to stop and get a quote.
When to stop and call a repairer
- There is no picture on any TV with any cable, including in safe mode or low-resolution mode.
- You can see bent, missing or pushed-back contacts in the HDMI port, or the port moves in the case.
- The picture flickers, sparkles or cuts out when the cable is touched or the console is nudged.
- The fault started after the console was dropped, the cable was yanked, or there was a storm or power surge.
- The power light pulses or blinks without settling, or the console turns itself off shortly after starting.
Stick drift and early hardware failures are well-known problems. If the console or controller is fairly new, contact the retailer or manufacturer before paying for a repair. Consumer guarantees can apply after the warranty has run out.
What it costs
- Doing it yourself
- $0 for the checks. A certified Ultra High Speed HDMI cable is typically $15–$40.
- Professional repair
- Varies by console model and by whether only the port or the HDMI output chip behind it also needs replacing. Ask for a quote after diagnosis.
There is no reliable published Melbourne pricing for this repair. Ask whether there is an assessment fee, whether it is credited against the repair, and what warranty covers the work. See our Melbourne repair cost guide for more.
Repair or replace?
A damaged HDMI port is well worth repairing on a current or recent console. The port is an inexpensive part and the cost is mostly skilled labour. It is soldered to the main board with many fine joints, so the work is micro-soldering done with hot air and a microscope. Done properly, the console is as good as before and your data is untouched.
Sometimes the event that damaged the port, or a surge that came down the cable, also takes out the small HDMI output chip behind it. A repairer can replace that too, but it adds to the cost, so ask for a quote that covers both possibilities. It is a poor first soldering project. Lifting a pad on the board can make the console unrepairable.
If the port failed without any knock or strain on a console that is still fairly new, raise it with the retailer before paying for repair. The Australian Consumer Law requires products to last a reasonable time, which can be longer than the manufacturer's warranty. Physical damage from a yanked cable is not covered, so be straightforward about what happened.
Not sure which way to go? Try the repair or replace calculator, and read your consumer rights before paying for a repair on something that failed early.
Common questions
Will I lose my games and saves if the HDMI port is replaced?
No. The port has nothing to do with storage, and a port repair does not require the console to be reset. It is still wise to keep cloud saves or backups turned on, and to ask the repairer to confirm they will not reset the console.
How do HDMI ports on consoles get damaged?
Mostly from sideways force on the plug. Someone trips on the cable, the console is pulled forward with the lead still attached, or it is pushed back against a wall so the plug is bent over. Plugging in by feel at the wrong angle can also bend the contacts. Leaving slack in the cable and unplugging it before moving the console prevents most of it.
Why does my console show a picture in safe mode but not normally?
Safe mode uses a basic resolution that almost any TV accepts. If it works there, the hardware is fine and the normal video settings are asking for something your TV, cable or port cannot handle. Change the video output or resolution from the safe mode menu, restart, and then raise the settings step by step.
My Switch is docked but nothing shows on the TV. What should I check?
Make sure the dock is powered by the Nintendo power adaptor plugged directly into the dock, and that the HDMI cable is in the dock's HDMI output. Unplug everything, then connect the power to the dock first, the HDMI cable second, and seat the console last. A Switch Lite cannot output to a TV at all.
Could it be the TV and not the console?
Yes, which is why testing another device on the same TV port and testing the console on another screen are both worth doing. If other devices work on that port and the console fails everywhere, it is the console. If the console works elsewhere, look at the TV's port and its HDMI format settings.
Melbourne repairers for game consoles
Independent businesses that list this kind of work. Listings are free and are not endorsements. Always confirm prices, licences and availability directly.
Mister Click
Shopfront167 King St, Melbourne VIC 3000
Repairs iPhone, Samsung Galaxy, Google Pixel and other phones, iPads, MacBooks and laptops, and lists PlayStation and Nintendo Switch console repairs. Mail-in available.
Second location at 480 Collins St.
The Repair Bee
ShopfrontKiosk 97, Northcote Plaza, Northcote VIC
Repairs smartphones, tablets and laptops, and gaming devices including PlayStation 5, Xbox, Nintendo Switch, Steam Deck and controllers. Mail-in available.
FixUPP Phone Repair Centre
Shopfront21/268-274 Springvale Rd, Springvale VIC 3171
Repairs iPhone, Samsung and Google Pixel phones, iPads, MacBooks and laptops, and PlayStation, Xbox, Nintendo Switch and Steam Deck consoles. Mail-in available.
Also in Frankston, Somerville, Brighton and Windsor.
Expert Phone Repairs
Shopfront378 Bay St, Brighton VIC 3186
Repairs smartphones, tablets and iPads, laptops and MacBooks, smartwatches, and PlayStation, Xbox, Nintendo Switch and handheld consoles and controllers.
Also in Bentleigh and Clyde North.
This guide is general information, not professional advice for your specific appliance or situation. Follow your manufacturer's manual where it differs, and read our disclaimer. Spotted an error? Tell us.
More consoles guides
Controller stick drift: what causes it and what you can do
Character or camera moving on its own? Learn what stick drift is, how to recalibrate, set deadzones and clean safely, and when to claim a repair.
Console overheating or fan running loud: safe fixes to try
PS5, Xbox or Switch running hot, roaring or shutting down? Fix placement and airflow, clean the vents and PS5 dust ports safely, and know when to stop.